CATL Launches TECTRANS II at IAA Transportation 2026 to Accelerate Global Commercial Vehicle Electrification

HANOVER, Germany, Sept. 14, 2026 /PRNewswire/ -- Contemporary Amperex Technology Co., Limited (CATL) today unveiled TECTRANS II, its next-generation commercial vehicle battery solution, at IAA Transportation 2026 in Hanover.

"Commercial vehicle electrification is emerging as the third wave of the global energy transition," said Akin Li, Executive President of CATL Overseas Business. "Across products, energy, services and ecosystem, CATL is poised to work with partners around the world to catch this third wave."

TECTRANS II: A Modular Platform Built for Commercial Vehicle Electrification

Scenario Adaptability: Designed for diverse commercial vehicle applications and operating requirements.

• One platform for multiple scenarios: By configuring different numbers of standardized battery packs, TECTRANS II can meet different energy capacity and payload requirements and support a maximum driving range of up to 1,000 kilometers.
• Flexible technology routes: The platform is compatible with both e-axle and central-drive architectures and supports flexible switching between charging and battery swapping.
• One Configuration, Lifetime Compatibility: The platform standardizes external dimensions, electrical interfaces and communication protocols while allowing battery technologies and pack designs to evolve. This enables both new and existing vehicle models to benefit from future upgrades without major changes to the vehicle platform.
• The modular design helps OEMs shorten vehicle development cycles by 50% and reduce R&D costs by 60% to 70%, supporting faster model launches and lower adaptation costs.

Lifecycle Economics: Designed to deliver stronger economics across the entire vehicle lifecycle.

• Faster payback: The modular platform eliminates the need to develop dedicated battery systems for each vehicle model, helping OEMs reduce development costs, shorten launch timelines and lower early-stage investment risk.
• Higher operating returns: TECTRANS II improves fleet economics in three ways.
  • Higher energy density: Boasting a gravimetric energy density of 170 Wh/kg, around 13% above the industry average, the battery enables vehicles to carry approximately 0.6 tonnes of additional payload at the same battery capacity.
  • Longer Range, Faster Charging: Its maximum configuration offers up to 1,000 km of range and 80% charging in 25 minutes with megawatt-level fast charging, minimizing downtime on long-haul routes.
  • Higher energy efficiency: The world's first full-tab low-impedance design enables 96% system round-trip efficiency (RTE), reducing charging losses and delivering more usable energy for daily operations.
• Stronger residual value: The TECTRANS II battery for heavy-duty trucks is engineered for a 12-year, 1.5-million-kilometer service life with 70% capacity retention, helping support stronger residual value for fleet assets.

• Higher energy density: Boasting a gravimetric energy density of 170 Wh/kg, around 13% above the industry average, the battery enables vehicles to carry approximately 0.6 tonnes of additional payload at the same battery capacity.
• Longer Range, Faster Charging: Its maximum configuration offers up to 1,000 km of range and 80% charging in 25 minutes with megawatt-level fast charging, minimizing downtime on long-haul routes.
• Higher energy efficiency: The world's first full-tab low-impedance design enables 96% system round-trip efficiency (RTE), reducing charging losses and delivering more usable energy for daily operations.

Safety and Reliability: Built to withstand real-world commercial operations.

• Robust physical protection:

• • Hot-formed steel upper cover: Withstands repeated stepping by an 180-kilogram adult 10,000 times without deformation.
  • Ultra-strong bottom plate: Delivers 1,000 J impact resistance to protect the battery pack from road impacts.
  • High-strength enclosure protection: Uses an extruded-aluminum enclosure with crush-resistant ribs, delivering lateral crush strength up to 250 kN.
  • 15-year corrosion resistance: Supports long-term operation in coastal environments and cold regions.
  • Maintenance-friendly design: Maintains IPXXB protection with the main connectors connected or disconnected, enhancing high-voltage safety during maintenance.

• Hot-formed steel upper cover: Withstands repeated stepping by an 180-kilogram adult 10,000 times without deformation.
• Ultra-strong bottom plate: Delivers 1,000 J impact resistance to protect the battery pack from road impacts.
• High-strength enclosure protection: Uses an extruded-aluminum enclosure with crush-resistant ribs, delivering lateral crush strength up to 250 kN.
• 15-year corrosion resistance: Supports long-term operation in coastal environments and cold regions.
• Maintenance-friendly design: Maintains IPXXB protection with the main connectors connected or disconnected, enhancing high-voltage safety during maintenance.

• System redundancy:

• • Architecture redundancy: Multi-branch independent BMS control enables the system to isolate a failed branch while the remaining branches continue to supply power.
  • Precise fault diagnosis: Proprietary insulation fault-location technology can distinguish whether an insulation issue comes from the battery or other vehicle components, enabling faster troubleshooting.
  • Cybersecurity protection: Multi-layer protection from chip hardware and software programs to the vehicle system, following international information security standards throughout development.

• Architecture redundancy: Multi-branch independent BMS control enables the system to isolate a failed branch while the remaining branches continue to supply power.
• Precise fault diagnosis: Proprietary insulation fault-location technology can distinguish whether an insulation issue comes from the battery or other vehicle components, enabling faster troubleshooting.
• Cybersecurity protection: Multi-layer protection from chip hardware and software programs to the vehicle system, following international information security standards throughout development.

TECTRANS II reflects CATL's long-term commitment to continuous innovation and consistent product quality. In addition, backed by real-world operating experience and rigorous validation, including full-vehicle torsion and external fire testing, the platform is designed for safety, reliability and long service life in demanding commercial vehicle operations.

Partnering to Build Green Freight Corridors Across Europe

At the show, CATL also signed an MoU with DHL Group. Building on the pair's September 2024 agreement, the MoU will see the two companies develop Green Freight Corridors across Europe. The partners will leverage DHL's logistics network, operational expertise and real-world transport requirements alongside CATL's battery technology and electrification ecosystem. They will also work with OEMs and other partners to co-develop purpose-built electric vehicles and launch pilot deployments.

"Commercial vehicle electrification will unfold over more than a decade," said Zhu Lingbo, CTO of CATL Global Business Unit. "With our deep technological expertise and long-term commitment, CATL is ready to be the most reliable partner for customers worldwide and for the global electrification of freight transport."

 

** This press release is distributed by PR Newswire through automated distribution system, for which the client assumes full responsibility. **

CATL Launches TECTRANS II at IAA Transportation 2026 to Accelerate Global Commercial Vehicle Electrification

CATL Launches TECTRANS II at IAA Transportation 2026 to Accelerate Global Commercial Vehicle Electrification

CATL Launches TECTRANS II at IAA Transportation 2026 to Accelerate Global Commercial Vehicle Electrification

CATL Launches TECTRANS II at IAA Transportation 2026 to Accelerate Global Commercial Vehicle Electrification

CATL Launches TECTRANS II at IAA Transportation 2026 to Accelerate Global Commercial Vehicle Electrification

A robust five-year pipeline of new developments and enhancements will expand world-class attractions, grow hotel capacity, and further strengthen Yas Island's global appeal

ABU DHABI, UAE, Sept. 14, 2026 /PRNewswire/ -- Miral, Abu Dhabi's leading creator of immersive destinations and experiences, will be investing more than AED 12 billion across Yas Island over the next five years. The substantial investment will support a pipeline of new developments alongside expansions and enhancements to existing attractions, reinforcing Miral's commitment to Abu Dhabi's Tourism Strategy 2030 and further strengthening Yas Island's position as a leading global destination for leisure and entertainment.

To view the Multimedia News Release, please click:  
https://www.multivu.com/miral/9421351-en-miral-invests-aed-12-billion-next-phase-yas-islands-growth

This next phase of development reflects a clear focus on expanding Yas Island's existing world-class theme parks and attractions, as well as introducing new immersive rides and experiences, that respond to evolving visitor expectations. The investment will also grow the island's hospitality offering, adding new hotel rooms and elevating its accommodation portfolio.

H.E. Mohamed Khalifa Al Mubarak, Chairman of Miral, said, "This investment reflects our commitment to Abu Dhabi's long-term vision and our ambition to continue shaping one of the world's most dynamic tourism destinations. Yas Island has become a global success story, demonstrating how world class experiences contribute to economic growth, enhance quality of life, and strengthen Abu Dhabi's appeal to audiences from around the world.

Over the next five years, this investment will build on that momentum, introducing new experiences and expanding our hospitality and leisure offering to meet our evolving visitor expectations. As Abu Dhabi continues to strengthen its position as a global center for tourism and entertainment, we remain focused on creating lasting value for residents, visitors and future generations, while contributing to the emirate's sustainable growth and diversification ambitions."

The AED 12 billion investment, separate from the previously announced Disney project, marks an important step in shaping the long-term growth of Yas Island, building on its established appeal and continuing to enhance its diversity of experiences.

These projects are designed to further enrich the visitor experience, while also supporting job creation and skills development within the tourism sector, thereby fostering a vibrant and future-ready economy for the emirate.

This investment demonstrates Miral's continued ambition to shape the future of leisure and entertainment in Abu Dhabi and the region, signaling the evolution of Yas Island's world-class attractions and experiences that will captivate and delight visitors from around the globe for generations to come.

For more information, visit www.miral.ae      

 

Yas Island, Abu Dhabi

 

 

 

 

 

** This press release is distributed by PR Newswire through automated distribution system, for which the client assumes full responsibility. **

Miral Invests AED 12 billion to Shape the Next Phase of Yas Island's Growth