The rites and rituals following the death of a pope, his funeral and burial, explained

VATICAN CITY (AP) — The death of a pope sets in motion a series of carefully orchestrated rites and rituals well before the conclave to elect his successor begins. They involve the certification of death and public display of his body for the faithful to pay their respects, followed by the funeral and burial.

Pope Francis, who died on Monday, revised various rites last year, simplifying the funeral rituals to emphasize his role as a mere bishop and allowing for burial outside the Vatican in keeping with his wishes. But the core elements remain, including the three key moments that must be observed between the death of a pope and his burial.

The reforms are incorporated into the slim red volume “Ordo Exsequiarum Romani Pontificis,” Latin for “Rite of Burial for Roman Pontiffs.”

While popes often tinker with the rules regulating the conclave that elects their successor, a revision of the papal funeral rites hadn’t been undertaken since 2000.

The changes became necessary after Francis expressed his own wishes, and after Emeritus Pope Benedict XVI died on Dec. 31, 2022. For Benedict, the Vatican had to work out the novelty of a funeral for the first retired pope in 600 years.

A few months later, Francis revealed he was working with the Vatican’s master of liturgical ceremonies, Archbishop Diego Ravelli, to overhaul the entire book of rites to simplify them.

In explaining the reforms, Ravelli said the changes aimed “to emphasize even more that the Roman Pontiff’s funeral is that of a pastor and disciple of Christ and not of a powerful man of this world.”

The three main stations, or moments, occur first in his home, then in St. Peter’s Basilica, and then in the place of burial.

The reform allows for the formal confirmation of death to occur in Francis’ personal chapel rather than his bedroom. It is unclear why, the change may be more practical than anything since Francis chose to live in a small suite in the Vatican’s Santa Marta hotel rather than the Apostolic Palace. He has a personal chapel at Santa Marta.

Upon the pope’s death, the head of the Vatican health service examines the body, ascertains the cause of death and writes a report. The body is dressed in white.

The body rests in the pope’s personal chapel for the ritual pronouncement of death, presided over by the camerlengo, the Vatican official who runs the Holy See administration between the death or resignation of one pope and the election of another. The camerlengo is American Cardinal Kevin Farrell, one of Francis’ most trusted aides.

In a change from the past, the rite no longer requires the body to be placed in the traditional three coffins made of cypress, lead and oak. Now, the pope’s body is placed in a wooden coffin, with a zinc coffin inside. The pope is dressed in red liturgical vestments, his miter — the traditional headdress of bishops — and the pallium woolen stole, a kind of scarf. The Pasqual candle, a large, decorated candle used at Easter, is placed nearby.

The camerlengo drafts the formal declaration of death, attaching the certificate that had been prepared by the health service chief.

The master of liturgical celebrations, Ravelli, then decides when other faithful can pay their respects before the coffin is moved to St. Peter’s Basilica for public viewing.

When the body is brought into the basilica, the Litany of Saints chant is sung. The camerlengo leads the procession.

In another change, the pope’s body is no longer placed on an elevated bier. Rather, the simplified wooden coffin is placed facing the pews, with the Pasqual candle nearby.

The night before the funeral, the camerlengo presides over the closing and sealing of the coffin, in the presence of other senior cardinals. A white cloth is placed over the pope’s face.

A bag containing coins minted during his papacy is placed in the coffin along with a one-page written account of his papacy — known in Italian as a "rogito," a word indicating an official deed. It is read aloud by the master of liturgical ceremonies and then rolled up and slipped inside a cylindrical tube that is placed inside the coffin. Another copy is kept in the Vatican archives. The covers of both the zinc coffin and the wooden one bear a cross and the papal coat of arms.

Francis’ coat of arms, which he kept from when he was bishop, features a shield and the monogram of his Jesuit order, with the words “Miserando atque eligendo,” Latin for “Having had mercy, he called him.” It comes from an episode in the Gospel where Christ picks a seemingly unworthy person to follow him.

The funeral is presided over by the dean of the College of Cardinals or, if that is not possible, by the vice dean or another senior cardinal. The current dean is Italian Cardinal Giovanni Battista Re, 91. The vice dean is Argentine Cardinal Leonardo Sandri, 81. Francis earlier this year extended both of their five-year terms rather than appoint new ones.

Francis’ reform allows for burial outside the Vatican, with the camerlengo presiding. Various seals are impressed on the coffin, and it is placed inside the tomb.

Francis has said he wants to be buried not in St. Peter’s Basilica or its grottoes, where most popes are buried, but in the St. Mary Major Basilica across town. His choice reflects his veneration of an icon of the Virgin Mary that is located there, the Salus Populi Romani (Salvation of the people of Rome).

After every foreign trip, Francis would go to the basilica to pray before the Byzantine-style painting that features an image of Mary, draped in a blue robe, holding the infant Jesus who in turn holds a jeweled golden book.

“It’s my great devotion,” Francis told Mexico’s N+ in revealing his future burial plans. “The place is already prepared.”

With the burial, the Catholic Church begins nine days of official mourning, known as the “novemdiales” and the conclave begins.

FILE - Pope Francis's coat of arms adorns the seat of a popemobile that will be used during his upcoming visit to Mexico, inside the presidential hangar at Mexico City's airport, Monday, Feb. 8, 2016. (AP Photo/Rebecca Blackwell, file)

FILE - Pope Francis is helped by his aide Archbishop Diego Giovanni Ravelli, right, as he arrives for the start of a public consistory to elevate 21 new cardinals, in St. Peter's Basilica, at the Vatican, Saturday, Dec. 7, 2024. (AP Photo/Gregorio Borgia, file)

FILE - Cardinal Kevin Farrell, head of the Vatican's family and laity office, talks during an interview with The Associated Press in office in Rome, Tuesday, July 31, 2018. (AP Photo/Paolo Santalucia, file)

FILE - Pope Francis attends a prayer for peace at Rome's St. Mary Major Basilica, Sunday, Oct. 6, 2024. (AP Photo/Andrew Medichini, file)

FILE - Faithful gather in front of St. Mary Major Basilica where Pope Francis presided over a procession on the Catholic festivity of Corpus Domini (Body of the Lord), in Rome, Sunday, June 2, 2024. (AP Photo/Alessandra Tarantino, file)

FILE - Pope Francis prays in front of a portrait of the Virgin Mary as he arrives in at St. Mary Major Basilica to preside over a vigil prayer, in Rome, Saturday, April 8, 2017. (AP Photo/Alessandra Tarantino, File)

FILE - The restored icon of Mary "Salus Populi Romani" (Salvation of the Roman People) is pictured at the end of a Mass celebrated by Pope Francis at St. Mary Major Basilica in Rome, Sunday, Jan. 28, 2018. (AP Photo/Gregorio Borgia, Pool, file)

FILE - Pope Francis touches an icon of the Virgin Mary after he recited the holy rosary at the St. Mary Major Basilica, in Rome, Saturday, May 4, 2013. (AP Photo/Gregorio Borgia, file)

FILE - Pope Francis waves to faithful as he arrives at Vatican's Santa Marta hotel where the Pontiff has his apartment, at the Vatican, March 28, 2013. (AP Photo/Gregorio Borgia, file)

FILE - Pope Francis celebrates Mass at the Santa Marta chapel at the Vatican, Friday, Feb. 16, 2018. (L'Osservatore Romano/Pool Photo via AP, file)

FILE - The body of late Pope Emeritus Benedict XVI lies out in state inside St. Peter's Basilica at The Vatican, Tuesday, Jan. 3, 2023. (AP Photo/Andrew Medichini, file)

FILE - Camerlengo of the Holy Roman Church Cardinal Eduardo Martinez Somalo, second right, swings an incense burner as Pope John Paul II's body lies in state inside St. Peter's Basilica for public viewing, four days before his remains will be entombed in the grotto below the church, at the Vatican, Monday, April 4, 2005. (AP Photo/Plinio Lepri, pool )

FILE - Pope Francis, touch is forehead as Cardinal Giovanni Battista Re spreads incense on the coffin of late Pope Emeritus Benedict XVI during a funeral mass in St. Peter's Square at the Vatican, Thursday, Jan. 5, 2023. (AP Photo/Alessandra Tarantino, file)

FILE - Pope Francis sits by the coffin of late Pope Emeritus Benedict XVI in St. Peter's Square during a funeral mass at the Vatican, on Jan. 5, 2023. (AP Photo/Andrew Medichini, File)

MIAMI--(BUSINESS WIRE)--Jan 13, 2026--

For decades, battery manufacturing has stood still despite advances in battery chemistry. Today, Material Hybrid Manufacturing Inc. (MATERIAL) announces it has raised $7.1 million in Seed funding, co-led by Outlander VC and Harpoon Ventures, with participation from GoAhead Ventures, Myelin VC, Demos Capital and Giant Step Capital, to break this stagnation and usher in a new era of energy design.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260112647458/en/

Dead space is dead

MATERIAL’s proprietary HYBRID3D™ technology prints energy directly into a component of any shape and size, removing the barriers between design intent and manufacturing reality. This category-defining method produces batteries which adopt the shape of the object rather than forcing the object to accommodate a rigid, cylindrical or pouch cell. The platform unites multiple advanced additive and semiconductor manufacturing techniques to print energy into the very structure of a device.

“The world doesn't need another breakthrough in battery chemistry; it needs a breakthrough in how we make energy storage,” said Gabe Elias, CEO of MATERIAL and 7-time Formula One World Champion design engineer. “We are building the tools to make electrical energy formless. Whether it’s filling the hollow profile of a fixed-wing drone or conforming to the body of a wearable device user, our platform allows electrical power to behave like a fuel design element. Our technology allows us to deploy anywhere and print exactly what the application demands.”

Validating the Mission: $1.25M Air Force Contract

Already demonstrating its value proposition, MATERIAL is currently partnering with the United States Air Force to execute a Phase II Small Business Innovation Research (SBIR) award for a $1.25 million project.

As part of this project, MATERIAL is collaborating with PDW and other leading U.S. defense developers to integrate conformal batteries directly into Class I unmanned aerial systems (UAS). By eliminating the "dead space" inherent in standard cylindrical cell arrays, MATERIAL’s technology is projected to dramatically increase pack-level energy densities by over 50% and reduce module weight by more than 22 percent for this study.

“MATERIAL’s ability to tailor battery geometry to our airframe would allow us to push endurance and payload limits further,” said Darsan Patel, Director of Product Design at PDW. “Conformal energy technology bridges the gap between rapid prototyping and field-ready performance.”

This partnership is an initial step towards edge manufacturing and domestic supply chain stability, in which MATERIAL would be able to deploy containerized units to produce mission-critical power supplies on demand, breaking reliance on fragile global supply chains.

Giving investors a reason to believe

“MATERIAL is creating an entirely new paradigm for the battery industry,” said Jordan Kretchmer, Senior Partner at Outlander VC. “Gabe and his team aren’t competing with gigafactories; they are rendering them obsolete for high-performance applications by enabling batteries to be designed around any product structure, instead of the structure having to be designed around the battery. This is the category-defining shift Outlander lives to back.”

Harpoon Ventures, utilizing its "Freedom Stack" thesis, identifies MATERIAL as a critical node for national resilience. “We invest in companies that give the U.S. and its allies an unfair technological advantage,” said Larsen Jensen, Founder and General Partner at Harpoon Ventures. “Current defense platforms are strangled by the geometry of commercial batteries. MATERIAL eliminates that constraint. Their ability to decouple energy storage from rigid form factors is a game-changer for our national industrial base. This is what manufacturing sovereignty looks like.”

Unlimited power, unlimited commercial possibility

On the commercial side, MATERIAL is working with consumer electronics partners on next-generation products. Additional pilots are underway across mobility, robotics, and wearables.

About Material Hybrid Manufacturing Inc.

Material Hybrid Manufacturing Inc. is rewriting the rules of energy storage. Its core technology, HYBRID3D™, is a chemistry-agnostic platform that 3D prints full-stack batteries in custom geometries. By merging the precision of semiconductor manufacturing with the flexibility of additive techniques, MATERIAL enables the creation of conformal batteries that fit seamlessly into the structure of any device. Headquartered in Miami, FL, MATERIAL is teaching the world how to manufacture autonomy.

For more information, visit www.material.inc.

From left: Founders Miles Dotson, Gabe Elias and Christopher Reyes, PhD