LOS ANGELES, Sept. 30, 2026 /PRNewswire/ -- Waterdrop Filter, a global water filtration brand, will bring its exclusive October Prime Day Deals from October 6–7, featuring a range of water solutions. More than just seasonal savings, the event is designed to make your fall routines more effortless, cozier, and healthier.
As fall routines return, mornings get busier with school runs, work commutes, coffee, and packed lunches, while cooler evenings bring more tea, cooking, and family meals at home. Waterdrop Filter's filtration solutions help make these everyday moments healthier and more convenient, with cleaner, better-tasting water supporting hydration, hot drinks, cooking, and shared family routines throughout the season.
Waterdrop X12 Reverse Osmosis System: MSRP $1299 to $899 (31% off)
Built for high-demand households, the X12 pairs 1200 GPD fast flow and 11-stage RO filtration with alkaline remineralization for cleaner, smoother-tasting water. Its smart faucet, tankless design, and 3:1 pure-to-drain ratio make it a premium upgrade for daily hydration, cooking, and fall gatherings.
Waterdrop K6 Instant Hot Water RO System: MSRP $799 to $499 (38% off)
The K6 combines powerful RO filtration with instant hot water from 104°F to 203°F, delivered straight from the faucet. From morning coffee and oatmeal to soup and holiday meal prep, its 600 GPD capacity makes busy fall routines faster and more convenient.
Waterdrop M6CG Mineral Cold & Hot RO System: MSRP $539 to $409 (24% off)
A 2026 premium new arrival, the M6CG brings RO filtration, remineralization, and hot-and-cold water from 59°F to 203°F into one installation-free countertop system. Five volume settings, Favorite Mode, and a detachable 40 oz glass pitcher make it a flexible choice for daily hydration, coffee, tea and entertaining.
Waterdrop CT01 Instant Hot & Cold Water Dispenser: MSRP $289.99 to $199.49 (31% off)
The CT01 offers an accessible countertop upgrade with hot and cold filtered water from 59°F to 203°F and no installation required. Its 6-stage filtration, 1.32-gallon capacity and no-wastewater design suit apartments, students, offices and smaller households looking for everyday convenience.
Waterdrop TSA, TSU & 10UA Under-Sink Water Filters: up to 32% off
For households that want simple everyday filtration without a full RO system, the TSA, TSU and 10UA offer compact, easy-to-install, low-maintenance options with long filter life —ideal for washing, cooking and daily meal prep.
Waterdrop Refrigerator Water Filters: up to 34% off
Waterdrop refrigerator filters offer a cost-effective replacement option for compatible LG, Whirlpool, GE and other major refrigerator brands, helping reduce chlorine, unpleasant taste and odor for fresher water and ice. Easy replacement and long-lasting filtration make them a simple way to refresh an existing refrigerator setup before fall gatherings and the holiday season.
With October Prime Day lasting just 48 hours, don't miss the chance to lock in these deals and upgrade your kitchen for less. Shop Waterdrop Filter at waterdropfilter.com and Amazon from October 6–7, making better water part of a healthier fall routine.
About Waterdrop Filter
Founded in 2015, Waterdrop Filter is a water purification company that offers solutions for homes, offices, and outdoor use. Its product range includes under-sink and countertop Reverse Osmosis (RO) systems, pitchers, and whole-house filters. With the mission of making clean water accessible worldwide, Waterdrop Filter provides water filtration products trusted by over 40 million families globally. Learn more at www.waterdropfilter.com
** This press release is distributed by PR Newswire through automated distribution system, for which the client assumes full responsibility. **
Waterdrop Filter Brings Better Water to Healthier Fall Routines This Prime Big Deal Days
ADH-5-13 joins the deployment-focused UDH-3-7 and a portfolio of two-, three- and five-finger robotic end effectors
PITTSBURGH, Sept. 30, 2026 /PRNewswire/ -- DH-Robotics today debuted the ADH-5-13, a five-finger dexterous hand with 13 independently controllable active degrees of freedom (DOF), at IROS 2026 in Pittsburgh. The company also demonstrated the UDH-3-7, its three-finger direct-drive dexterous hand, alongside a portfolio of two-, three- and five-finger end effectors for a range of gripping and manipulation tasks.
The debut reflects DH-Robotics' "Dexterity as Productivity" approach: matching hand architecture, sensing and control to the manipulation requirements of embodied AI research, teleoperation and robotic systems.
ADH-5-13: a five-finger platform for multi-finger manipulation
The ADH-5-13 uses an anthropomorphic five-finger configuration with 13 active DOF. The thumb, index finger and middle finger each have three DOF; the ring and little fingers each have two. The index and middle fingers also provide ±15° of lateral motion for a broader range of multi-finger poses.
At 735 g, the hand is designed to balance dexterity with system weight. DH-Robotics specifies a maximum lifting payload of up to 20 kg once an object is grasped.
The ADH-5-13 integrates fingertip tactile sensing and can accommodate additional sensing options, including electronic skin, six-axis force/torque sensors and vision-based tactile sensors. Sensors and individual modules can be replaced without dismantling the entire hand or a full finger, simplifying service and maintenance. According to DH-Robotics, this serviceable design improves maintenance efficiency by 300%, helping reduce downtime and operating and maintenance costs.
The hand's fully direct-drive, backdrivable architecture provides independent control of all 13 active DOF. Dual magnetic encoders at each joint provide position feedback, and DH-Robotics specifies fingertip positioning repeatability of ±0.2 mm. The company says the architecture supports hybrid force/position control and compliant contact behavior in manipulation tasks.
UDH-3-7: strength, flexibility and a compact three-finger form factor
The UDH-3-7 is built around a streamlined three-finger configuration with seven active DOF. DH-Robotics specifies a maximum payload of 15 kg, maximum fingertip force of 50 N, positioning repeatability of ±0.02 mm and a design life of one million cycles.
The hand also uses a direct-drive, backdrivable design. Its thumb supports a 180° range of rotation and opposition, enabling different grasp configurations for objects with varied shapes and materials.
UDH-3-7 supports CAN FD, RS-485 and EtherCAT. Development tools support C++ and Python, while ROS 2 integration and workflows using Isaac and MuJoCo can help teams evaluate and integrate the hand in embodied AI systems.
A portfolio organized around the task
DH-Robotics positions its two-, three- and five-finger end effectors around distinct manipulation needs:
- Two-finger end effectors: general-purpose gripping and grasping.
- Three-finger dexterous hands: a balance of strength, dexterity and working space for manipulation.
- Five-finger dexterous hands: coordinated multi-finger manipulation and more complex dexterous tasks.
IROS attendees can see the portfolio at Booth #1008 through Sept. 30. The IROS 2026 conference runs Sept. 27–Oct. 1 in Pittsburgh.
About DH-Robotics
DH-Robotics develops robotic end effectors and precision motion-control components for industrial automation and embodied AI. Its portfolio includes electric grippers, dexterous hands, linear coil actuators, rotary grippers and servo electric cylinders. Learn more: https://en.dh-robotics.com/.
** This press release is distributed by PR Newswire through automated distribution system, for which the client assumes full responsibility. **
DH-Robotics Debuts 13-DOF Direct-Drive Dexterous Hand at IROS 2026
