Featured offers spotlight Smart Plug Gen3 and Smart Light Bulb ZL1 four-packs, plus soil moisture sensing for plant care.
SAN JOSE, Calif., Nov. 11, 2026 /PRNewswire/ -- THIRDREALITY today announced its Black Friday 2026 promotions, with featured offers on Smart Plug Gen3 four-packs, Smart Light Bulb ZL1 four-packs, and soil moisture sensors. The selection brings together power monitoring, smart lighting, and sensing products for shoppers expanding their connected homes.
In the United States, selected offers will be available on Amazon US from November 19 through November 30, 2026. Canadian promotion details and a local shopping destination are listed separately below.
Featured US Offers
Smart Plug Gen3 Four Pack
See how much power connected devices are using while adding smart control around the home. Smart Plug Gen3 provides real-time power monitoring, and its metering-only mode lets users monitor consumption without remote on/off control. Firmware updates do not require switching connected devices off and back on, keeping power flowing during the update.
Each plug also acts as a Zigbee repeater, helping extend the reach of an existing Zigbee network. The four-pack brings power monitoring and network extension to multiple locations around the home.
Regular price: $44.99. Black Friday price: US$38.24 for four plugs — equivalent to US$9.56 per plug (15% off).
Shop Smart Plug Gen3 4-Pack on Amazon US: https://www.amazon.com/dp/B0GHQT8TQ8
Smart Light Bulb ZL1 Four Pack
Add smart lighting while helping extend an existing Zigbee network. Each Smart Light Bulb ZL1 also acts as a Zigbee repeater, giving the four-pack a role beyond lighting as shoppers expand their connected homes.
Regular price: $29.99. Black Friday price: US$25.49 for four bulbs — equivalent to US$6.37 per bulb (15% off).
Shop Smart Light Bulb ZL1 4-Pack on Amazon US: https://www.amazon.com/dp/B0DHFSDV46
Per-unit prices are calculated from the four-pack purchase price. Both offers require purchase of the four-pack. A compatible Zigbee hub or coordinator is required for both products. Supported platforms include Home Assistant (ZHA and Zigbee2MQTT), SmartThings, Aeotec, Hubitat, Homey, and compatible Echo devices with built-in Zigbee hubs. The ZL1 bulb must remain connected to power to function as a Zigbee repeater; switching it off at the wall will interrupt its repeater function.
Smart Soil Moisture Sensor Gen2 Three Pack
Bring soil moisture monitoring into a connected home setup with the Smart Soil Moisture Sensor Gen2, another featured offer in this year's Black Friday selection.
Regular price: $56.99. Black Friday price: US$32.99 for three sensors — equivalent to US$11 per sensor (42% off).
Shop Smart Soil Moisture Sensor Gen2 3-Pack on Amazon US: https://www.amazon.com/dp/B0GJYRZ61L
A compatible Zigbee 3.0 hub or coordinator is required. The sensor supports SmartThings, Home Assistant (ZHA and Zigbee2MQTT), Hubitat, and Homey. Apple Home and Google Home integration is available through the optional Smart Bridge MZ1.
More Smart Home Deals
Additional U.S. offers span presence detection, motion sensing, switches, and lighting. Selected highlights include:
- Smart Mechanical Keyboard MK1: $39.99 (50% OFF) – Shop Now
- Smart Presence Sensor R2: $24.99 (38% OFF) – Shop Now
- Smart Presence Sensor R3: $37.99 (24% OFF) – Shop Now
- Smart Switch MT1: $24.99 (29% OFF) – Shop Now
- Smart Night Light-T: $19.99 (33% OFF) – Shop Now
- Zigbee Motion Sensor R1: $17.99 (40% OFF) – Shop Now
Black Friday in Canada
Canadian shoppers can explore THIRDREALITY Black Friday offers on Amazon Canada from November 19 through November 30, 2026. Visit Amazon Canada for participating products, Canadian-dollar prices, and applicable offer conditions.
All prices listed in the U.S. sections are in U.S. dollars and apply to the specified products and package quantities on Amazon US. Canadian offer details are presented separately through the Canadian shopping link. Prices and availability are subject to change. Offers are valid for a limited time during the applicable promotional period.
About THIRDREALITY
Third Reality is a smart home technology company dedicated to developing high-quality, user-friendly, and secure smart home products. Through continuous innovation and a deep understanding of market needs, the company strives to provide an improved smart home experience for users worldwide.
CONTACT:
Tina Zhu
Marketing Manager
Third Reality, Inc.
info@thirdreality.com
** This press release is distributed by PR Newswire through automated distribution system, for which the client assumes full responsibility. **
THIRDREALITY Announces Black Friday 2026 Deals on Smart Plugs, Lighting, and Sensors
The T450 and T700 offer build volumes of 450 × 350 × 400 mm and 700 × 500 × 1,000 mm, starting at US$4,999 / €4,999 and US$15,999 / €15,999, with actively heated chambers and fiber-ready nozzles; both debut at Formnext 2026.
FRANKFURT, Germany, Nov. 11, 2026 /PRNewswire/ -- Raise3D today introduced the T450 and T700, the most affordable large-format industrial 3D printers with an actively heated chamber, extending its T Series to build volumes of 450 × 350 × 400 mm and 700 × 500 × 1,000 mm. Both will be shown for the first time at Formnext 2026 in Frankfurt from November 17 to 20.
Raise3D also announced a 100 mm build-height increase for its RMS220 selective laser sintering (SLS) printer, enabled by a software update, and introduced the B520 automated sandblaster for polymer powder bed parts. Raise3D completed a US$15 million funding round in November 2026, supporting development across large-format FFF, SLS and DLP, hardware-software integration, application development, and expansion into new applications and markets.
What Makes the Best Large-Format 3D Printer for Production?
Two questions decide the machine: whether the part can be produced in one piece, and whether the printer can run long jobs in a factory environment while continuing to make parts that meet specification. Both put pressure on motion control across a large working area and on process stability over multi-day prints, which is what the T Series is built around.
T450 and T700: Build Volume and Specifications
| Model | Build volume (W × D × H) | Build volume | Heated chamber | Standard nozzle | US price | Europe price |
| T450 | 450 × 350 × 400 mm | 63 L | up to 70°C | 0.4 mm | US$4,999 | €4,999 |
| T700 | 700 × 500 × 1,000 mm | 350 L | up to 60°C | 0.6 mm | US$15,999 | €15,999 |
Model
Build volume (W × D × H)
Build volume
Heated chamber
Standard nozzle
US price
Europe price
T450
450 × 350 × 400 mm
63 L
up to 70°C
0.4 mm
US$4,999
€4,999
T700
700 × 500 × 1,000 mm
350 L
up to 60°C
0.6 mm
US$15,999
€15,999
The T450 suits jigs and fixtures, casting patterns, large prototypes and production aids. The T700 suits large tooling, patterns and other large-format applications. Both use fused filament fabrication (FFF) and share one tech platform.
T450 and T700 Highlights
- Big parts in one piece: build volumes of 450 × 350 × 400 mm and 700 × 500 × 1,000 mm, so suitable jigs, tooling and patterns do not have to be split, bonded and finished.
- Steady motion across a long span: a 4MD CoreXY system with four frame-mounted motors, designed to reduce vibration, surface ringing and the risk of layer shifts.
- High-flow extrusion: TwinFlow™ feeds two filament paths into one nozzle, reaching up to 600 mm/s and 80 mm³/s under the reference test conditions[1], and switches to two materials for soluble supports or dual-color parts.
- Actively heated chamber: Air Flow Manager 2 adjusts the chamber by material, holding up to 70°C on the T450 and 60°C on the T700 for large ABS and nylon parts, and switching to directed cooling with an automatic top vent for lower-temperature materials such as PLA.
- Fiber-ready hot end: a 420°C nozzle and 120°C build plate, with a copper-chromium-zirconium base and solid silicon carbide tip for compounds such as PET CF, PPA CF and PPS CF.
- Built for long runs: camera monitoring, spaghetti, flow and run-out detection, power-loss recovery and an emergency stop, with RFID material identification, mesh leveling and ideaMaker support.
CEO Edward Feng said:
"Larger build areas open up applications that were previously limited by size. A scoliosis brace is one of them. It has to be printed in one piece, because a brace that is split into sections and bonded back together does not have the strength a brace needs to hold the spine. Adolescent idiopathic scoliosis affects around 1 to 3 percent of teenagers, and a build area that is too small only covers a child's torso. On the T450, an adolescent brace fits inside the 450 × 350 mm build area with room to spare, so it comes off the machine as a single part. The same reasoning applies to tooling, patterns and production aids."
Application Example: Battery Cell Transport Trays
Power-battery manufacturing puts that constraint at a different scale. Jigs and fixtures must suit different products and production lines, and conventional machining can involve long lead times and design constraints, particularly for high-mix, low-volume requirements.
For cell-transport trays, Raise3D used the T450 and T700, alongside material, structural design and process optimization. Production time fell from about 40 days to 10 days, and tray weight from about 8 kg to 2 kg, reductions of approximately 75% in both. The gain came from the combination of build area, extrusion throughput and material choice, which is the combination the T Series is built around.
From FFF to SLS: RMS220 Adds 100 mm of Build Height
Work with production customers has shown that the limit on part size is not specific to FFF. The same pressure appears in selective laser sintering (SLS), where build height decides how tall a part can be and how many parts fit in one build.
Raise3D's RMS220 SLS printer now offers a build volume of 220 × 220 × 450 mm (approximately 21.8 L), up from 220 × 220 × 350 mm (17 L). The additional 100 mm of Z height increases build height and build volume by approximately 30%, and is enabled through a software update on existing machines, without a hardware change.
The taller build space allows suitable components that previously exceeded the 350 mm height to be produced in a single build and provides more room for nesting.
B520: Automated Sandblasting for Powder Bed Parts
The same customer conversations surfaced a second constraint, one that comes after the print. Print services often run powder bed parts from more than one machine brand, and all of those parts need cleaning and surface treatment.
The B520 is an automated sandblaster for polymer powder bed parts. Its enclosed workstation combines automatic blasting, air blow-off and ionization, and a manual mode allows operators to reach deep recesses and shielded areas. Suitable parts can be processed as a programmed batch. The independent system supports the RMS220 as well as third-party SLS, MJF, SAF and HSS equipment, and its standard and large baskets have internal volumes of 24.8 L and 75.5 L, respectively.
The RMS220 update widens what can be built in one cycle; the B520 addresses what happens to those parts afterwards.
Availability and Pricing
The T450 is priced at US$4,999 in the United States and €4,999 in Europe; the T700 at US$15,999 and €15,999. Prices for the two industrial 3D printers exclude configuration, tax, shipping and service terms, which are set in the regional quotation. Deliveries of the T450 begin by the end of December 2026, with the T700 expected by the end of January 2027. Buy T450/ T700 now.
Join Raise3D at Formnext 2026
Both printers will be at Formnext 2026 in Frankfurt from November 17 to 20, in Hall 12.1, Stand D21.
| [1] The reference test conditions for TwinFlow™'s maximum volumetric flow of 80 mm³/s: Raise3D Hyper Speed ABS V2 filament, 250°C nozzle temperature and a 0.4 mm nozzle, printing a single-wall smooth structure. Actual performance depends on material, nozzle, layer height, model and print settings. |
[1] The reference test conditions for TwinFlow™'s maximum volumetric flow of 80 mm³/s: Raise3D Hyper Speed ABS V2 filament, 250°C nozzle temperature and a 0.4 mm nozzle, printing a single-wall smooth structure. Actual performance depends on material, nozzle, layer height, model and print settings.
About Raise3D
Raise3D develops 3D printers, materials, software and additive manufacturing solutions for professional and industrial applications. With offices in the United States, Europe and Asia, the company has built an ecosystem integrating FFF, DLP and SLS technologies to support workflows from prototyping to end-product production. Its quality and environmental management systems are certified to ISO 9001:2015 and ISO 14001, respectively. To Learn more, visit www.raise3d.com.
Watch the Raise3D T450 video.
Raise3D Media Kit
** This press release is distributed by PR Newswire through automated distribution system, for which the client assumes full responsibility. **
Raise3D Launches the T450 and T700, the Most Affordable Large-Format 3D Printers with an Actively Heated Chamber
